EASA, DGCA Exam Module 05 All Books Mixed Questions Made By AviAtor SuNiL BhaBar
AviAtor Sunil BhaBar Module 05 Pdf is designed for the preparation of EASA DGCA Module 05 (Digital Techniques). It covers important topics from EASA Module 05 Book, Mike Tooley, and David Mike Tooley. Old DGCA question papers and self-made questions are also provided in the PDF. Thoroughly study the PDF and gain a deep understanding of all the topics for effective preparation. Focus on topics like Logic Gates, Number Systems, Microprocessors, Data Buses, and Memory Devices. Understand circuits and their functions. Practice solving questions and make your own notes. Enhance your speed and accuracy by consistently taking mock tests. Keep revising all the concepts.
AviAtor SuNiL BhaBar Module 05 Set 1to5 Pdf.
AviAtor SuNiL BhaBar Module 05 Set 6to10 Pdf.
AviAtor SuNiL BhaBar Module 05 Set 11to15 Pdf.
Flight Instruments By AviAtor SuNiL BhaBar
1. Flight Instruments
• Attitude Indicator (AI): A instrument which displays the a/c orientation relative to the earth horizon.
• Airspeed Indicator (ASI): A instrument which measures the aircraft's speed relative to air.
• Altimeter: A instrument which Shows altitude above sea level.
• Vertical Speed Indicator (VSI): A instrument which displays the rate of climb or descent.
• Heading Indicator (HI): A instrument which Indicates the aircraft's heading (direction).
• Turn Coordinator: A instrument which Shows rate of turn and coordination.
2. Navigation Instruments
• Horizontal Situation Indicator (HSI): Combines navigation and heading information.
• VOR (VHF Omnidirectional Range) Indicator: Provides direction relative to ground-based VOR stations.
• ADF (Automatic Direction Finder): Tracks non-directional beacons (NDBs).
• GPS Receiver: Provides position, speed, and time using satellite signals.
• Flight Management System (FMS): Centralized control for navigation, flight planning, and performance management.
3. Communication Instruments
• VHF/UHF Radios: Enable communication with ATC and other aircraft.
• Transponders: Send identifying signals to radar.
• Data Link Systems: Facilitate digital communication (e.g., ACARS).
• Satellite Communication (SATCOM): Provides long-range communication.
4. Engine Instruments
• Engine Pressure Ratio (EPR) Gauge: Measures engine performance.
• Tachometers (RPM Indicators): Indicate engine speed.
• Exhaust Gas Temperature (EGT) Gauge: Monitors exhaust temperature.
• Fuel Flow Indicator: Displays fuel consumption rate.
5. System Monitoring Instruments
• Hydraulic Pressure Gauges: Monitor hydraulic system pressures.
• Electrical System Indicators: Show voltage and current status.
• Fuel Quantity Indicators: Display the amount of fuel in tanks.
• Oil Temperature and Pressure Gauges: Monitor engine oil parameters.
6. Flight Control Instruments
• Trim Indicators: Display control surface trim settings.
• Flap Position Indicators: Show flap deployment levels.
• Landing Gear Indicators: Confirm landing gear status.
7. Weather Instruments
• Weather Radar: Detects precipitation and weather patterns.
• Stormscope: Identifies lightning strikes.
• Pitot-Static System: Provides airspeed, altitude, and VSI data.
8. Advanced Avionics
• EFIS (Electronic Flight Instrument System): Integrates flight instruments on digital screens.
• EICAS (Engine Indicating & Crew Alerting System): Displays engine information alerts and system information with alerts.
• TCAS (Traffic Collision Avoidance System): Warns of nearby aircraft.
• GPWS/TAWS (Ground Proximity Warning System/Terrain Awareness and Warning System): Prevents controlled flight into terrain (CFIT).
• Autopilot Systems: Provide automated flight control.
9. Memory
• RAM (Random Access Memory): A type of volatile memory that provides quick read and write access, used in computers for temporary storage.
• ROM (Read-Only Memory): Non-volatile memory that stores permanent data, often containing firmware or boot instructions.
• EEPROM (Electrically Erasable Programmable ROM): A type of ROM that can be erased and reprogrammed electronically, used in embedded systems.
• ALU (Arithmetic Logic Unit): A part of the CPU that performs arithmetic and logical operations on data.
• Microprocessor: The central processing unit (CPU) on a single integrated circuit, executing instructions and controlling operations.
